How to use it
- Enter the length in feet
- Enter the width in feet
- Enter the depth in inches
- Click Calculate and view cubic yards, cubic feet, and tons
What it does – The 1 inch Rock Calculator converts the rectangular area you plan to fill into three practical units: cubic yards, cubic feet, and an estimated weight in tons. You input the length and width in feet and the depth in inches; the tool handles the unit conversion automatically. Why it matters – Knowing cubic yards lets you order the right amount of rock, while cubic feet helps with site‑specific planning and the ton estimate gives you a quick cost gauge, since rock typically weighs about 1.4 US tons per cubic yard. How to read – The cubic‑yard figure is the volume you’ll order, the cubic‑foot number is the same volume expressed in a smaller unit, and the ton value is the approximate weight for budgeting. Use the results to compare supplier quotes or confirm truck capacity.
Pro tips
- Add 5‑10% waste allowance to the cubic‑yard result for compaction and spillage
- Round up to the nearest 0.1 yd³ for ordering simplicity
- Check supplier minimum order sizes before finalizing
- Double‑check depth entry; inches vs. feet can change volume dramatically
Real-life examples
- Homeowner estimating rock for a new garden pathway
- Contractor sizing a rock base for a patio slab
- Landscaper planning drainage rock for a yard slope
Case study
Before: Maria estimated her driveway fill by eyeballing the area and over‑ordered 30 yd³ of rock. After using the 1 inch Rock Calculator, she entered 40 ft × 20 ft × 2 in and got 0.5 yd³ (≈0.7 tons), ordering exactly what she needed and saving $250.