How to use it
- Enter length in feet
- Enter width in feet
- Enter depth in inches
- Click “Calculate” to see cubic yards, cubic feet, and tons
What it does – The Bunker Sand Calculator turns the three dimensions of your project (length, width, depth) into three useful measures: cubic yards, cubic feet, and an estimated weight in tons. Why it matters – Knowing the exact volume prevents over‑ordering, which saves money and reduces truck trips, while under‑ordering can delay a landscaping job. How to read the results – Cubic yards is the standard unit for ordering sand; multiply by 1.3 to see the approximate tons you’ll receive. Cubic feet is handy for comparing against material specs or for small‑scale calculations. The tool uses the industry‑standard conversion of 1 cubic yard = 27 cubic feet and a weight factor of 1.3 US tons per cubic yard, so the numbers are ready to use when you call a supplier.
Pro tips
- Add 5‑10% extra for compaction and spillage.
- Round up to the nearest 0.1 cubic yard for ordering.
- Order sand by the ton only if the supplier quotes weight; otherwise use cubic yards.
- Double‑check depth measurement; a common mistake is entering depth in feet instead of inches.
Real-life examples
- A homeowner preparing a 12 ft × 8 ft patio with a 4‑inch sand base.
- A contractor estimating sand for a 30 ft × 20 ft driveway repair at 3 in depth.
- A landscaper needing sand volume for a 50 ft × 15 ft garden path with a 2‑inch layer.
Case study
Mike needed sand for a 10 ft × 12 ft patio with a 3‑inch depth. The calculator showed 0.92 cubic yards (≈1.2 tons). He ordered 1 cubic yard, saved a truckload, and completed the job on schedule.