How to use it
- Enter the length in feet.
- Enter the width in feet.
- Enter the depth in inches.
- Click Calculate to see cubic feet, cubic yards, and ton estimate.
What it does – The Crushed Stone Tons Calculator turns your project dimensions (length, width, depth) into three useful numbers: cubic feet, cubic yards, and an approximate tonnage. Knowing the volume in cubic yards lets you compare quotes from suppliers, while the ton estimate helps you order the right amount of material without costly over‑orders. The tool uses the industry‑standard conversion of 1 cubic yard = 27 cubic feet and a weight of 1.4 US tons per cubic yard. After you input your numbers, the results appear instantly, so you can adjust dimensions, add a waste factor, and see the impact on cost before you call a supplier. The cubic‑foot figure is handy for checking against material‑order sheets that list volume in cubic feet. The ton estimate is rounded to one decimal place, giving a practical figure for ordering bulk deliveries. Use the calculator early in planning to avoid surprise shortages and to budget accurately.
Pro tips
- Add 5‑10% extra for compaction and breakage.
- Round up to the nearest whole ton when ordering bulk deliveries.
- Order a little more than the calculator shows to avoid running short during installation.
- Double‑check depth units; the calculator expects inches, not centimeters.
Real-life examples
- Planning a 500 sq ft driveway and need to know stone tonnage.
- Landscaping a garden bed 8 ft by 4 ft with a 4‑inch base layer.
- Estimating material for a patio foundation before getting quotes.
Case study
Mike entered his patio dimensions (12 ft × 8 ft × 6 in) and instantly saw 1.33 cubic yards and 1.9 tons; he ordered 2 tons, avoided a costly shortfall, and finished on schedule.