How to use it
- Enter the length in feet
- Enter the width in feet
- Enter the depth in inches
- Read the cubic yards, cubic feet, and tons results
This tool converts the dimensions of a crusher‑run project into three practical measures: cubic feet, cubic yards, and approximate tons. Knowing the cubic yards tells you how many bulk‑bag loads to order, while cubic feet helps when you need precise fill levels for small jobs. The ton estimate, based on the industry standard of 1.4 US tons per cubic yard, lets you budget material costs accurately. Simply input length, width, and depth, and the calculator does the math in seconds. The results appear in a clear table: cubic feet (raw volume), cubic yards (volume divided by 27), and tons (cubic yards × 1.4). Use these numbers to order the right amount, avoid over‑paying, and keep your project on schedule.
Pro tips
- Add 5‑10% extra for compaction and waste
- Round up the ton figure to the nearest whole ton for ordering
- Convert depth to feet (divide inches by 12) before calculation
- Double‑check units; the calculator expects feet for length/width and inches for depth
Real-life examples
- A homeowner preparing a 12 ft × 10 ft patio base needs to know how many tons of crusher run to order
- A landscape contractor estimating material for a driveway resurfacing project wants quick volume and weight numbers
- A DIY gardener filling a raised bed with crusher run wants to avoid ordering too much or too little
Case study
Mike needed a 10 ft × 8 ft patio base 4 in deep. Using the calculator, he saw he required 0.99 cubic yards, which translates to about 1.38 tons. He ordered 2 tons, covered compaction loss, and completed the patio on budget without extra trips.