How to use it
- Enter length in feet.
- Enter width in feet.
- Enter depth in inches.
- Read the cubic yards, cubic feet, and tons results.
What it does – The Gravel Estimator takes the length, width, and depth you enter and instantly converts them to cubic feet, then to cubic yards, and finally to an approximate tonnage using the industry‑standard 1.4 tons per cubic yard. Why it matters – Knowing the exact volume prevents over‑ordering, saves money, and avoids project delays caused by running out of material. How to read the results – Cubic feet shows raw space, cubic yards is the common ordering unit for suppliers, and tons gives a weight estimate for transport limits. The calculator rounds to two decimals for yards and one decimal for tons, which is precise enough for most residential jobs. Use the numbers to get accurate quotes, plan deliveries, and keep your budget on track.
Pro tips
- Add 5‑10% extra for compaction and settling
- Round up to the nearest 0.5 cubic yard for ordering
- If your carrier has weight limits, order by tons instead of volume
- Measure depth on a level surface to avoid common under‑estimates
Real-life examples
- Homeowner building a new driveway
- Landscaper installing a garden path
- DIYer filling a patio base
Case study
Sarah needed 1.5 cubic yards of gravel for a 10 × 12 ft patio with a 4‑inch depth. The estimator showed 1.5 yd³ (≈2.1 tons), so she ordered exactly that amount, avoided a costly over‑order, and completed the patio on schedule.