How to use it
- Enter length in feet.
- Enter width in feet.
- Enter depth in inches.
- Read cubic yards, tons, and cubic feet instantly.
What it does – The Gravel Fill Calculator turns the dimensions of your area into three practical measures: cubic yards (what most suppliers quote), tons (the weight you’ll pay for), and cubic feet (useful for on‑site planning). Why it matters – Ordering too little means extra trips and delays; ordering too much wastes money and fills your truck. How to read the results – Cubic yards is the volume to request from the vendor, tons is the estimated weight (1 yard ≈ 1.3 tons), and cubic feet helps you visualize the depth across the whole surface. The calculator also shows the result in cubic feet so you can double‑check the numbers against your own manual conversion. No need for spreadsheets or guesswork; the figures update the moment you change any input.
Pro tips
- Add 5‑10% extra volume to cover compaction and spillage.
- Round up to the nearest half‑yard to simplify ordering.
- Order by weight (tons) if the supplier charges per ton.
- Double‑check depth entry; inches, not feet, are required.
Real-life examples
- Homeowner laying a new driveway path.
- Landscaper filling a garden bed for a client.
- DIYer preparing a base for a patio pavers.
Case study
Maria needed 1.5 yd³ of gravel for a 12 ft × 8 ft patio at 4 in depth. Using the calculator she saw she actually required 1.6 yd³ (≈2.1 tons) and ordered the correct amount, avoiding a costly second delivery.