How to use it
- Enter wall length in feet.
- Enter wall height in feet.
- Enter unit dimensions (default 16 in × 8 in).
- Click Calculate to see units needed and total area.
What it does – The Barkman Paver Calculator takes the length and height of a wall or any flat area (in feet) and tells you exactly how many 16‑inch by 8‑inch paver units are required, plus the total square‑footage those units cover. Why it matters – Knowing the precise unit count prevents over‑ordering, saves money, and speeds up project planning. How to read the results – Units needed is the raw count of whole pavers that fit the dimensions; Area shows the combined surface area of those pavers in square feet. No mortar gap or waste factor is built in, so you can add your own allowance afterward. If your project uses a different paver size, simply adjust the unit length and height fields before calculating; the tool will instantly recalculate with the new dimensions. The calculator works on any device, so you can estimate on‑site with a phone or at the office on a laptop.
Pro tips
- Add a 5‑10% waste allowance after you get the raw unit count.
- Always round up to the next whole paver to avoid shortfalls.
- Order an extra full pallet to cover unexpected breakage or cuts.
- Measure interior wall dimensions; exclude trim or molding from the length and height.
Real-life examples
- Homeowner planning a 12‑ft × 8‑ft backyard retaining wall.
- Contractor estimating pavers for a commercial storefront façade.
- Landscape designer sizing a decorative patio border for a client.
Case study
Mike needed a 10 ft × 6 ft stone wall. He entered the dimensions, hit calculate, and saw he required 90 pavers covering 60 sq ft. With that exact number, he ordered just enough material, saved $200, and finished the wall on schedule.