EZ1 Calculators
Sign in

Paver Stone Calculator

Instantly calculate how many 16"×8" paver stones you need and the total square footage for any wall or area – free and fast.

  • Free
  • No sign-up
  • Instant results

Loading calculator…

How to use it

  1. Enter wall length in feet
  2. Enter wall height in feet
  3. Leave unit size at 16 in × 8 in (or edit)
  4. Read units needed and total area

What it does – The Paver Stone Calculator takes the length and height of your wall or surface (in feet) and the dimensions of a single paver (default 16 in × 8 in) and instantly tells you how many stones are required and the total area in square feet. Why it matters – Knowing the exact count prevents over‑ordering, saves money, and speeds up project planning. How to read the results – Units needed is the whole number of stones that will cover the space; Area shows the combined surface area of those stones, matching the input dimensions. No extra waste or mortar gap is included, so add your own contingency if needed. If your pavers differ, simply change the unit length and height fields; the calculator will recompute instantly. This tool works for interior walls, outdoor retaining walls, or any flat surface where standard pavers are used.

Pro tips

  • Add 5‑10% extra stones for breakage and cuts.
  • Round up the unit count; you can’t order a fraction of a stone.
  • Order the exact size you entered; manufacturers may list dimensions in inches.
  • Double‑check measurements; measuring the wall in feet vs. inches can cause errors.

Real-life examples

  • A homeowner planning a 12 ft × 8 ft garden wall wants to know how many 16×8 pavers to buy.
  • A contractor estimating material for a 30 ft high retaining wall needs the total stone count and area.
  • A landscape designer sizing a decorative patio of 20 ft × 15 ft wants quick, accurate quantities.

Case study

Jane needed a 10 ft × 6 ft backyard wall. Using the calculator, she saw she required 90 pavers covering 60 sq ft, ordered exactly that amount, and avoided a $200 over‑order.

Frequently asked questions

How do I convert my wall dimensions from feet to inches?
Multiply feet by 12; the calculator does it automatically when you enter feet.
Do I need to include mortar gap in the calculation?
No, the tool assumes the pavers sit edge‑to‑edge; add any gap manually after you get the result.
Can I use the calculator for rectangular floor areas?
Yes, just enter the floor length and width as length and height fields.
What if my pavers are a different size?
Change the unit length and height inputs; the results update instantly.
Why does the result sometimes show a fraction of a unit?
The raw division may produce a decimal, but you should round up to the next whole stone because you can’t purchase part of a stone.