How to use it
- Enter the length in feet.
- Enter the width in feet.
- Enter the thickness in inches.
- Read the cubic feet, cubic yards, and bag count results.
The Sakrete Paver Base Calculator turns your project dimensions—length, width, and thickness—into three practical numbers: total cubic feet, cubic yards, and the number of 80‑lb bags needed. Knowing the exact volume helps you order the right amount of mix, avoid costly over‑orders, and keep the job on schedule. The result shows cubic feet first, then converts to cubic yards (1 yd³ = 27 ft³), and finally divides the cubic feet by 0.6 ft³ per bag to give a bag count. Use the bag total as a baseline, then add a waste allowance. The tool updates instantly as you change any dimension, so you can experiment with different thicknesses before you buy. You can also compare multiple projects side‑by‑side by saving the results or copying them into a spreadsheet. The calculator works for driveways, patios, walkways, and any flat paver installation where a compacted base is required.
Pro tips
- Add 5‑10% extra bags for spillage and compaction loss.
- Round up the bag count to the next whole bag; you can’t buy a fraction.
- Order bags in multiples of 5 or 10 to get bulk discounts.
- Double‑check thickness; a common mistake is entering inches as feet.
Real-life examples
- Homeowner planning a 12 ft × 15 ft patio with a 3‑inch base.
- Contractor estimating materials for a 500 ft² driveway upgrade.
- Landscape designer sizing the paver base for a garden walkway.
Case study
Mike needed a 10 ft × 10 ft patio with a 4‑inch base. Using the calculator he saw he required 33.3 ft³ of concrete, which equals 1.23 yd³ and 56 bags. He ordered 60 bags, avoided a shortfall, and completed the patio on schedule.